You can program sequencer-functions.

Example: landing gear with doors. Let us assume that your Scale Model or your Jet has a retractable landing gear with both two gear legs as well as two landing doors.

• Choose a switch channel in your transmitter which you would like to use to retract and deploy your undercarriage.
• Choose the ‘slow functionÂ’ for a switch channel of your choice of your transmitter. For this procedure you should switch an appropriate time – for instance 4 seconds.
• In the configurations menu of your Dual Receiver (Servokonfiguration/Servo settings), you should combine four exits with the chosen channel, two for the servos respectively the magnetic valve which open and/or close the doors, and two to retract or deploy the undercarriage.

Channel 8 is responsible for the undercarriage in the example. The exits for the landing doors are number 12 and 13, the undercarriage confirmation (servos respectively valves) are on the outputs 14 and 15.

Configure the servo exits as shown in the following screnshots.

The left door opens. The x-axis represents the time. The distance from the left to the right is 4 seconds in this example (in the transmitter for the slow-function feature).

Exit 13:

The left gear leg deploys.

Exit 15:

While retracting the whole procedure works vice versa. You will find the new firmware in the version 1.4.4 under Downloads/software. If you are not registered yet, you can do it there. We will provide you with the latest information via email.